Mining Technician interview questions and practice.
Supports mine planning and operations with surveys, sampling, ventilation and equipment checks.
No card for the taster. Full interviews are paid one at a time. Nothing renews.
Last reviewed
This page is still being written: no authored question bank for this competency family. The role is fully supported in the interview itself; only the published question bank is outstanding.
What interviewers for Mining Technician actually ask
The question bank for this role is still being written. These are the first three competencies in the model the interview is scored against.
Works to the Mine Health and Safety Act or OHS Act and site standards, does proper pre-shift examinations and risk assessments, and exercises the right to withdraw from or stop unsafe work regardless of production pressure.
Operates mining, plant or network equipment to standard operating procedures and licence conditions, does pre-use inspections honestly, and reports defects rather than running with them.
Plans the shift, allocates resources, hits tonnage, metres, MW or availability targets, records losses accurately and recovers lost time without cutting safety corners.
What they are really assessing
Interviewers rarely score whether you seemed nice. They score against a model like this one, usually without telling you it exists. Each competency has a weak, adequate and strong shape, and the difference is almost always the level of specific detail you volunteer without being asked.
Safety culture, MHSA & stop-work authority
Works to the Mine Health and Safety Act or OHS Act and site standards, does proper pre-shift examinations and risk assessments, and exercises the right to withdraw from or stop unsafe work regardless of production pressure.
- Weak
- Says 'safety first' but cannot describe a specific hazard they stopped work for, a pre-shift examination, a section 23 withdrawal, or how production pressure was handled.
- Adequate
- Describes a hazard identified and the action taken, but is vague on the risk assessment used, who was told, or what changed in the section afterwards.
- Strong
- Recounts a specific stop-work: the hazard (loose ground, gas, unbarricaded area, live conductor), the standard breached, who they withdrew, how a shift boss or supervisor reacted, the make-safe and restart, and the effect on the team's behaviour or LTIFR.
Operating equipment & processes to standard
Operates mining, plant or network equipment to standard operating procedures and licence conditions, does pre-use inspections honestly, and reports defects rather than running with them.
- Weak
- Cannot describe the pre-use inspection or key SOP steps for equipment they claim to operate, or admits running with known defects to keep production going.
- Adequate
- Describes the SOP and checklists correctly but has no example of a defect they found and reported or of refusing to operate defective equipment.
- Strong
- Describes a specific pre-use finding (brakes, fire suppression, guarding, insulation), what they did, the pressure to continue, and how the defect was closed out; knows the licence or competency required for the equipment.
Meeting production & shift targets safely
Plans the shift, allocates resources, hits tonnage, metres, MW or availability targets, records losses accurately and recovers lost time without cutting safety corners.
- Weak
- Cannot state their shift targets or main causes of lost production, or attributes all misses to factors outside their control.
- Adequate
- Knows targets and loss reasons and describes a good shift, but has no example of a recovery decision or a trade-off between production and safety.
- Strong
- Quantifies a specific period: target vs actual, the main losses, a recovery action they took (re-sequencing faces, redeploying crews, changing the plan) and how safety was protected while doing it.
Incident response & investigation
Responds correctly to incidents and emergencies (make safe, evacuate, report, preserve the scene), takes part in investigations honestly and implements corrective actions.
- Weak
- Cannot describe an incident or emergency they were involved in, the emergency procedure, or how an investigation was run.
- Adequate
- Describes an incident and the immediate response, but is vague on reporting requirements, root cause findings or whether corrective actions were closed.
- Strong
- Recounts a specific incident: the immediate actions, reporting and notification (including regulator where required), the investigation method (ICAM or similar), root causes found and corrective actions with evidence they were implemented.
Technical problem solving in the field
Diagnoses and resolves problems in ore flow, geology, plant process, network faults or generation equipment using data, drawings and systematic elimination, and escalates when outside their competence.
- Weak
- Gives a generic 'we fixed it' story with no diagnosis steps, data or reasoning, or cannot give a real example.
- Adequate
- Describes a real problem and the fix but the reasoning is thin: what was measured, what was ruled out, and root cause are unclear.
- Strong
- Walks through a specific problem (e.g. recovery drop, network trip, ground conditions), the data used, the options considered, the decision and its result, and what was changed to prevent recurrence.
Crew leadership, discipline & fairness
Leads crews with clear instructions and fair, consistent discipline, handles absenteeism and conflict, and keeps the crew engaged in safety and targets.
- Weak
- Says the crew 'respects them' but cannot describe a specific instruction, conflict, disciplinary matter or safety conversation with the crew.
- Adequate
- Describes leading a crew and one discipline or conflict issue, but is vague on process (warnings, union involvement) or what changed in the crew.
- Strong
- Recounts a specific case: the behaviour, the conversation held, the formal process followed, how fairness was maintained with the union or other crew members, and the effect on the crew's safety or production.
Reliability, shift discipline & fitness for work
Reports fit for duty on every shift, respects fatigue and substance rules, completes handovers and records properly, and can be depended on for standby and emergencies.
- Weak
- Claims reliability with no detail on shift patterns, fitness-for-work rules, handover content or a standby call-out.
- Adequate
- Describes shifts and handovers but is vague on fatigue management, what a handover must contain or standby experience.
- Strong
- Describes their shift routine, a specific handover with what was communicated, a fatigue or fitness situation handled correctly, and a standby or emergency response with timing.
Environmental & community responsibility
Understands the environmental and social licence obligations of the site (water, dust, tailings, rehabilitation, community commitments) and acts on them in daily work.
- Weak
- Cannot name an environmental control or community commitment relevant to their site or role, or treats them as someone else's responsibility.
- Adequate
- Names environmental controls and community issues but has no example of acting on one or handling a related problem.
- Strong
- Describes a specific environmental or community situation (spill, dust complaint, water discharge, community protest) and their role in addressing it, with reference to the relevant permit, plan or commitment.
Reading the questions is the easy half. Try answering three of them out loud, to someone who follows up.
Try 5 minutes freeWhat your 30 minutes covers
The same shape as a real first-round interview, pitched at mid-level Mining Technician and scored throughout.
Warm-up, then Motivation & fit
Build rapport, settle nerves, and get a short walk-through of your background. Why this role, why this employer, and what you are actually looking for.
Your experience
Two or three real situations from your CV in depth: context, what you did, what happened, what you would change.
Pitched at mid-level scope: experienced operator, miner (blasting certificate), engineer or specialist: owns a working place, panel, plant section or network area on shift; plans and executes with a crew.
Role-specific questions
The core competencies and domain knowledge for the role, with follow-ups on anything vague.
Drawn from this role's domain: mHSA and OHS Act duties, legal appointments and the right to withdraw, pre-shift examinations, making safe, barricading and entry examinations and risk assessment and standards: baseline, issue-based, mini risk, SOPs, and the rest of the competency model.
Your questions, then Wrap-up
Your questions for the interviewer, and yes, they are assessed. Next steps and a clean finish.
What changes with seniority
The questions barely change between levels. What changes is the answer they will accept.
| Junior | Mid | Senior | |
|---|---|---|---|
| Scope of ownership | Qualified operator, artisan, miner's assistant, technician or graduate in training: operates equipment or performs a role independently to standard under a shift supervisor. | Experienced operator, miner (blasting certificate), engineer or specialist: owns a working place, panel, plant section or network area on shift; plans and executes with a crew. | Shift boss, senior engineer, foreman or control room lead: legally appointed responsibility for a section or shift; accountable for safety, production and people. |
| Tolerance for ambiguity | Handles normal conditions; must recognise abnormal conditions and stop and report. | Handles changing ground, process and equipment conditions within standards; escalates when outside authority or competence. | Makes withdraw, stop and restart decisions; balances targets against ground, equipment and people conditions. |
| People leadership | None formally; may guide a helper or trainee. | Leads a crew or small team day to day; coaches trainees. | Leads several crews or a team of specialists; handles discipline, performance and development. |
| Who they deal with | Shift boss or supervisor, crew, safety officer, maintenance. | Shift boss or section head, planning, maintenance, safety, union stewards. | Mine overseer or section manager, planning, engineering, SHE, HR, unions. |
What your report would say
Every competency above scored from your own answers, the sentence that cost you quoted back, and your weakest answers rewritten the way a strong Mining Technician would have said them.
- Quantifies a specific period: target vs actual, the main losses, a recovery action they took (re-sequencing faces, redeploying crews, changing the plan) and how safety was protected while doing it.
The format, not a result. Scores on your report come from what you actually said.
Is the AI interviewer realistic? See a full sample report